GP 212 features ail the attributes
of the GP 210, plus:

@ Acorrosion-resistant, fiberglass
reinforced polyester (FRP)

tank of twice the size.

@ Provision for adding a second

pump ata later date if increased

flow makes it necessary.

® Double the peak flow holding
capacity is available where total

flow can be handled by one pump,

but occasional large peaks re-

quire increased holding capacity.

Seasonal holiday or weekend
facilities often exhibit this flow
pattern,

4 ‘A de

Re-ordee No. GP-tG/L

WISGTIES

Ww

WAYNEIRSAN

aw

GRINDER PUMP*

MODEL FARRELL 212

The GP 212 finds a broader range of appli-
cations as a result of increased capacity,
For instance, one GP 212 can effectively

’ handle the normal volume of wastewater from

a small commercial building ar two single-
family dwellings.

CERTIFICATIONS

National Sanitation Foundation
Canadian Standards Association

Motor;
1 HP, 1725 rpm, capacitor start, thermally
protected; 240 volts, 60 Hertz,’1 phase.

&lectrical Supply Requirements:
240v, 10 amp, 60 Hz.

irdet Connection: :
3 or 4 inch C.1., copper, or non-metallic
OWV may be adapted at tank entrance
fittings. Overflow connection of the same
- size available,

Discharge Connections:
Pump discharge terminates in 1-% inch
NPT maie thread. Can be easily adapted to
1-% inch PVC pipe or any other materiat
required by local codes.

Highest Normal Design Pressure:
35 PSIG (81 ft. head)

. Discharge: t

1S gpm @ 0 psig
11 gpm @ 35 psig

Overload Capacity:
Able to handle temporary peak Pressure to
50 PSIG with no noticeable drop in output.
Ficw does not drop to zero at “shutoff”
as centrifugal pumps do. Automatic reset
thermal overload prevents pump and system
overpressures.

Net Weight lincluding tank}:
. 200 Ibs.

*  Pacents issued and pending

t Discharge data includes tosses through check valve,

which are minimat

CORPORATION
PROTECTING MAN'S ENVIRONMENT
2773 Balitown Road + Schenectady, New York 12309

° envirggment one 1974

Printed in U.S.A,