~3- a "Certificate of Verification" (or equal) together with the manufacturer's (inventory) “Inspection Report", after the components of all fire alarm systems incor- porating annunciator panels, have been inspected and verified to meet the manufacturer's specifications and the Building Code, and the whole system or applicable portion thereof has been tested. by the manufacturer, owner and installer. In addition to the requirements in subsection (d) of tliis Section, a “high building" coming under the provisions of the Provincial Code shall undergo prior professional field review and monitored testing to substantiate in writing the operation and suitability of the following devices: (1) by the Electrical Design Engineer, the components of required communications systems; emergency power sources; exit and corridor lighting; emergency lighting; circuits and electrical control devices for elevators, ventilation, pressurization, smoke control and automatic fire suppression systems; and other applicable monitoring | systems; by the Mechanical Design Engineer, the components of all ‘systems for air handling, smoke control, exhaust, pressur- ization, automatic fire suppression, Fire fighting vater supnly and pumps. Cf) The owner of every “hivh building" as set out du the VProvinetal Code shall have prepared and reproduced onto durable material: an epproved “Inventory Control” with an illustrative legend locating ald fire emerpency ovotenss a "Preventative Maintenarea and supplement, designed for the fire emerpency components and systems; a comprehensive "Fire Safety Plan" approved by the Fire Chief for communication; evacuation and operation of the fire emergency systems; (iv) a "Maintenance Log Book" designed to meet the intent of clause (1i)..